Activate the subnet scope the laptop named gstlap the lobby

Passing Score: 80%

View results by:		Objective Analysis

You did not complete the lab correctly.

Address range: 172.25.10.60 to 172.25.10.85

Subnet mask: 255.255.0.0

Scope option for DNS servers: 163.128.78.93

WINS Servers: Do not set

2. Right­click the CorpDCHP12 server and click Connect
(maximize the window for easier viewing if desired).
3. From Server Manager, click Tools > DHCP.

[netpro2015_lab_questions_en.exm EXM_DHCP1]

You did not complete the lab correctly.

You are a network technician for a small corporate network with several remote employees who usually work from home, but occasionally need to be in the office for meetings. They need to be able to connect to the network using their laptops. The network uses a DHCP server for IP address configuration for most clients. While working in the Lobby, a remote employee asks you to configure her laptop (named Gst­Lap) so she can connect to the network.

Create an alternate TCP/IP connection with the static settings.

[netpro2015_lab_questions_en.exm EXM_DHCP2]

You did not complete the lab correctly.

You are helping a friend in college with his network connection. The dormitory where he lives has installed a 1000BaseT Ethernet network, and this network uses automatic IP addressing with IP address, default gateway, and DNS server information being delivered by a DHCP server. You would like to configure your friend's computer (named Dorm­PC) to use a different set of DNS server addresses than what is being delivered by the DHCP server.

You must have Dorm­PC validate the static DNS server information.

[netpro2015_lab_questions_en.exm EXM_DORM_DNS]

You did not complete the lab correctly.

You are a network technician for a small corporate network. You need to configure a workstation (named Exec) so it can connect to the local network and the Internet. Your network is connected to the Internet as shown in the Exhibits.

For the default gateway address, choose the appropriate
address for the Router as shown in the Exhibits.

For the DNS server address, use the address of an external
DNS server as shown in the Exhibits.

Use the Network and Sharing Center in Windows to confirm that the workstation is properly connected to the local network and the Internet.

[netpro2015_lab_questions_en.exm EXM_IPADDR2]

You did not complete the lab correctly.

You are a network technician for a small corporate network. The network uses IPv4, but you want to begin using some Windows Server 2012 features that require IPv6. Before you can begin to implement these features, the computer in the Networking Closet (named CorpServer) needs a static IPv6 address.

Use 2001:CBA9:8765:4321::108 for the DNS Server address.

[netpro2015_lab_questions_en.exm EXM_IPV6]

You did not complete the lab correctly.

You are a network technician for a small corporate network. The network is connected to the Internet and uses DHCP for address assignment. The
employees in Office 1, Office 2, and the Support Office report that their workstations can communicate with some computers on the network, but not on the Internet. You need to diagnose and fix the problem for these employees.

The DHCP server console in the Windows Server 2012
operating system

Fix the problem at the workstation, the DHCP server, or both as necessary.

	To answer this question, complete the lab using information below.	Launch Lab

The ping, ipconfig, or tracert command utility

The Network and Sharing Center in the Windows 7 or
Windows 2012 operating system

[netpro2015_lab_questions_en.exm EXM_TRB_IP_CONF3]

Click the Done button when you have found the information you need to answer the following questions:

• What is the IP address of the default gateway for ITAdmin?
• What is the IP address of the ISP Internet router?
• What is the IP address of the PartnerNet router?

Explanation

Click Done to answer the following questions:

Click the Done button when you have found the information you need to answer the questions.

How many routers are in the path between ITAdmin and the remote computer?

73.44.216.19

Explanation

	Question 11:		Incorrect

previously used workstation in the Support Office, and now you need to

connect the computer to the Ethernet local area network and the Internet.

Within the Networking Closet, use the appropriate twisted pair cable to

make a connection between the patch panel and switch as follows:

automatically from the server on the local network.

Use the Network and Sharing Center to confirm that the

DHCP.

Your task in this lab is to:

Subnet mask: 255.255.255.0 (24­bit length)

Lease duration: 5 days