Connect the phone the support office

Passing Score: 80%

View results by:		Objective Analysis

To answer this question, complete the lab using information below.	Launch Lab

You did not complete the lab correctly.

Select and install the corresponding cable and connect the
computer to the local area network.

In the operating system, confirm that the workstation has a connection to the local network and the Internet.

You did not complete the lab correctly.

Connect the two computers to the hub. Reconnect the cables as necessary between the HomePC and the cable modem.

Use the AC to DC power adapter to plug in the hub.


		To answer this question, complete the lab using information below.

You did not complete the lab correctly.

Select the correct cables to connect the two computers to the
networking device.

Use the AC to DC power adapter to plug in the device.

Your task in this lab is to:

Connect the two computers using the appropriate network components.

You will not need to configure the port speed in this lab, but the device should be capable of this feature.

[netpro2015_lab_questions_en.exm EXM_SWITCH]

You did not complete the lab correctly.

You are a network technician for a small corporate network. It was decided to add IP phones for the network administrator in the IT Administration office and for guests in the Lobby. The ITAdmin workstation and the Lobby laptop need to be daisychained to the IP phones.

Provide power to the IP Phone (include the power supplies
and/or surge protectors if necessary)

Confirm that ITAdmin connects to the network and the Internet.

Your task in this lab is to do the following:

Explanation

Note: Do not add the power adapter to the IP phones.
• In the Networking Closet:

• Connect the PoE compliant switch to the rack.

1. Expand the Phones category on the Shelf and drag an IP Phone to the IT Administration workspace.

2. To connect the IP phone, switch to the back view of the phone.

8. To connect the IP Phone in the Support Office, repeat steps 1 through 7.

9. Make sure the workstations in both offices are connected to the network and to the Internet.


		To answer this question, complete the lab using information below.

You did not complete the lab correctly.

Disable specific ports that would create a switching loop.

To enable or disable a port, click the port with your mouse. An enabled port will show an activity light. Click the Exhibits button for more