Download as:
Rating : ⭐⭐⭐⭐⭐
Price: $10.99
Language:EN
Pages: 10

You are viewing 1/3rd of the document.
Purchase the document to get full access instantly.

Immediately available after payment
Both online and downloadable
No strings attached

Installing the dhcp server role log the rwdc

DHCP LAB - Exercise #1

The DHCP Server will try to lease a client broadcasting for an IP address. The DHCP server will respond by leasing an IP address from a pool of addresses that is configured to lease with option configured in that scope. You will configure and test this process during this lab.

Computer Name Operating System IP address
RWDC01 Windows SERVER 2012 192.168.1.50
Server01 Windows SERVER 2012 192.168.1.60
Server02 Windows SERVER 2012

Change 192.168.1.70 to Auto

EXERCISE 1. Installing the DHCP Server Role.

SERVER.

• Select ADD features and NEXT, NEXT and NEXT and then INSTALL.

• Open Server Manager. Select Tools, then DHCP.

In the DHCP Page. Right Click IPv4, Select New Scope, NEXT

• Yes I want to configure these options. Next

• Router= 192.168.1.1 Add. NEXT

• Log on to Server02.

• Right Click on the Network Icon on the Tool Bar of Server02. Select Open Network and

• Select the Obtain and IP address Automatically. And Obtain DNS server address

Automatically.

• Type IPCONFIG /all

What is the IP address of the DNS given by the DHCP Server: _____________________

• Open the DHCP Application Console.

• Double Click on the Scope you created.

• Supported Type= Both.

Part 2 - Test result from Server02

Is this the same IP address you made the Reservation: YES NO

EXERCISE 5 Configure the DHCP Server with a Scope of IPv6 Addresses.

Properties.

• Use the Following IPv6 Address: 2FFF::1111

• Scope Prefix Page. Prefix=2FFF:: Subnet Prefix Length=64 Next.

• Add Exclusion: AAAA:1:1:1 to BBBB:1:1:1 Next

What is the IPv6 Address leased by the DHCP server.

Show each lab to the instructor after you finish, before starting the next lab.

• In the Add Server, select SERVER01 (enter Server01's IP address), Next.

• In the MODE, Select the HOT Standby, and clear the option Enable Message Authentication , Next and Finish.

• Select RWDC01, ACTION, all TASKS and STOP.

SERVER02
• Start the command prompt.

starting the next lab.

DHCP Lab - Exercise #3

Scope Options:

148.152.129.111

NBT node

M

Server02 . Try to lease an IP address from this Scope

IP Address: ____________________

On your RWDC01 Create a Scope.

• Scope Name: Sales Group
• Scope Range: 33AB::
• Exclusion Start: ABDC End: AFFC 20 Days• Lease Preferred Time
• Lease Valid Time: 40 Days
Scope Options:
SNTP Servers IPv6 Address list: 33AB::DEED
From the Server02try to lease an IP address from this Scope.

What IP address did the DHCP lease you?

Show each lab to the instructor after you finish, before

Copyright © 2009-2023 UrgentHomework.com, All right reserved.