Hs1011 Data Communication And Networks Assessment Answers

Answer:

Scenario 1:

Answer: 1

Here extended star topology is used for this type of network, because in this network three floors are connected. For better performance all computer are connected in extended start topology. Topology is a structure of a network for mange physically and logically to all network devices and systems. Physical means placement of devices and logical means flow of data. Five types of topologies used for network designing, as Star, tree, bus, ring and Mesh topologies. There are some hybrid topologies also used. Those are just merging of these topologies. Like star and bus topology merge and it is known as extended star topologies.

Answer 2:

Network will be server based, because all computers are connected from all systems for sharing customer’s information and billing databases. In case of peer-to-peer network, all systems are connected like ring topology and if any connections fail it means whole network is down.   

Answer 3:

In this Network, I can connect 254 computers with class- C subnet mask, which is start from 192.168.1.1 to 192.168.1.254. However, if I want to connect with servers also it means total 255 computers are there, so I used class B address, which are better for future.

Answer 4:

Router is best option for easiest reconfigure or Level-3 switch also work in this type of network. Cat-6 cables will be provide good data transfer but if data transfer is high then also used optical fiber for pairs of all devices. I can use some network monitor soft wares for managing user information according to their used id and password.

Answer 5:

For managing three floors of building, Extended Star Topology will be used for EBiz.com. So according to requirement it should be divided in three parts.

In first part, all first floor computers connected with a switch and mange with a server. In second floor, same start topology follow for connecting all second floor computers. Same architecture used for third floor computers. Also use three routers for three floors in the building or I can manage with a single router also.

Scenario 2:

Answer 1:

Before I start subnetting. I have to ask ourselves these two questions for managing network.

First is “how many subnet do I need?”

2ⁿ  is number of subnets.

Where, n is the number of 1’s in the subnetmask.

So in this scenario, I need three subnets are needed for this network.

Second question is “how many hosts per subnet do I need?” in an octet, 8 bits are there so when I take 2 bits for subnetting then 6 bits for hosts.

2^m - 2 = number of hosts per subnet.

Where, y is the number of 0’s in the subnet mask.

So according to that I can manage this network by three subnets.

Answer 2:

A subnet mask allows networks to divide in small networks for security and performance purposes. Subnet mask is not an IP address; it is a part of network bits, which are used to create sub-networks. In this scenario, three routers are connected with three switches. Therefore, I can divide this network in three parts.

Answer 3:

Four subnets will be created for this scenario but I require only three for this scenario as EBiz.com has an office in a building with three floors.

These are the basic information about the network:

List of subnet masks with network addresses, usable host ranges, and broadcast addresses.

It will be depend on bits, which are taken from network bits in different classes. In class C, network different sub-networks can be created with different hosts in each network. Every octet has 8 bits so it is 2⁸ means 256 nodes, but first and last used for set and reset. In this given scenario, 4 subnets are created because I take 2 bits for sub networks.

Answer 4:

Total four sub networks created for this scenario as per requirements. Only three networks will be used according to given condition. A simple formula is used for create subnet mask.

It is depend on number of bits. 2^x subnet mask will be created. Where, x is number of bits.

In this case, I used 2 bits for creating 4 sub networks.

Following are the four sub networks used for this scenario:

Scenario 3:

Subnet mask and IP address of desired network:

Answer 1:

Subnet mask is 255.255.255.240. In this scenario, 16 sub networks created as requirement. So divide this network in small chunks as per requirements of corporate customers. According to this subnet mask, whole network is divided in different parts. All users are restricted in their home workgroups. Performance of network will be increased using this type of networking.     

Answer 2:

For this particular network, I can create 16 networks with 10-14 hosts. Therefore, I take 4 bits for subnet and 4 bits for hosts.

Following are the first four subnetworks among 16 sub networks:

References

Fall, K. R. & Stevens, W. R., 2011. TCP/IP Illustrated, Volume 1: The Protocols. 2 ed. New Jersey: Addison-Wesley.

Certiology, 2018. Network Devices:. [Online]
Available at: https://www.certiology.com/computing/computer-networking/network-devices.html
[Accessed 29 08 2018].

Cisco, 20018. IP Addressing and Subnetting for New Users. [Online]
Available at: https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13788-3.html
[Accessed 29 08 2018].

Cowley, J., 2012. Communications and Networking. 2 ed. kingswinford: Springer Science & Business Media.

Kenneth C. Mansfield, J. & Antonakos, J. L., 2009. Computer Networking for LANS to WANS: Hardware, Software and Security. 1 ed. Bostan(MA): Cengage Learning.

lifewire, 2018. Subnet Masks and Subnetting. [Online]
Available at: https://www.lifewire.com/internet-protocol-tutorial-subnets-818378
[Accessed 28 08 2018].

Subnetting, 2018. Subnetting Tutorial. [Online]
Available at: https://www.subnetting.net/Tutorial.aspx
[Accessed 29 08 2018].

Techdonut, 2018. Network management tasks. [Online]
Available at: https://www.techdonut.co.uk/buy-and-manage-it/regular-it-maintenance/network-management-tasks
[Accessed 29 08 2018].